Instruction and Application: Ultra-low carbon stainless steel tungsten electrode arc welding wire, low electrode impurity, metal mechanical properties and corrosion resistance.Suitable for welding of a 316L (022Cr17Ni12Mo2) type austenite stainless steel.Also can be used as carbon steel or low alloy steel surface corrosion resistant layer welding.
Typical Chemical Composition of the wire (%)
C |
Si |
Mn |
S |
P |
Cr |
Ni |
Mo |
0.015 |
0.38 |
1.61 |
0.009 |
0.018 |
19.27 |
12.47 |
2.21 |
Mechanical properties of all-weld metal
Temperature |
Tensile strength Rm(MPa) |
Yield strength Rp(MPa) |
Elongation A(%) |
Bending Test (GB/T2653) |
Room temperature |
580 |
470 |
35 |
No Cracks |
All-welded metal radio-graphic testing:
According to NB / T 47103.2, The radio-graphic testing should not be less than class AB and the quality grade of all-welded metal should not be less than Class I at least.
Reference range (DC-)
Sizeφ |
Category |
Gas |
Amperage (A) |
Argon flow (L/min) |
Speed (mm/min) |
φ0.8mm |
Auto |
Ar |
140-160 |
12.5-13.5 |
80-120 |
Φ1.0mm |
Auto |
Ar |
150-170 |
12.5-13.5 |
80-120 |
Φ1.2mm |
Auto |
Ar |
160-180 |
12.5-13.5 |
80-120 |
Φ1.6mm |
Manual |
Ar |
130-150 |
15-17 |
80-150 |
Φ2.0mm |
Manual |
Ar |
140-160 |
15-17 |
80-150 |
Φ2.4mm |
Manual |
Ar |
150-170 |
15-17 |
80-150 |
Notice:
1.The welding consumables surface rust, oil and other impurities to be clean.
2.Each layer is controlled below 150℃.
3.The operation is appropriate to the short arc, arc length control in 1-3mm.
Contact us